CO2 Extinguishing Systems with SIL 2 Certificate – Fire Protection for Power, Petrochemical and Process Engineering

Rosenbauer Fire Protection has used the international SIL 2 certification since 2011 and all of the tried and tested  CO2 extinguishing systems therefore meet the special safety requirements in power plant operation and in process engineering. The extinguishing systems are certified for risk classes up to SIL 2 and fit as an integral component in the security concepts of entire systems. The corresponding systems have been developed and installed for clients such as MAN, Kawasaki, Ferrostaal and Atlas Copco.

WATER EXTINGUISHING SYSTEMS

Water-based fire extinguishing systems
make up the largest share of the
extinguishing technology – in case of
sprinkler systems a simple and reliable
technology for decades.

GAS EXTINGUISHING SYSTEMS

The extinguishing effect of inert gases is
achieved by displacing the oxygen in the air.
Assets are protected by the slow response
that is typical of the inert gases CO2,
nitrogen and argon.

FIRE PROTECTION PRODUCTS

Basics as Fire Alarm Systems and
Gas Protection Systems or
innovations like cost-reduction
with automated system inspections
and the retrofit of Fire Dampers.

SIL 2 is the Key to the Responsibility of the Plant Operator

Statutory Regulations concerning SIL 2

The best possible state of the art security requirements are required by law in most countries. It is up to the operator to decide how to achieve the required degree of safety through practical solutions.

The objectives are often individual developments with a focus on the economic needs of the business. This increases with customisation of the solution but also the individual’s responsibility.

The normalization via the „Safety Integrity Level“ (SIL) however has the advantage of an internationally standardized assessment of protective equipment, defined life cycle management with the documentation of function-related development sections and a comprehensive assessment of the entire protective equipment. The classified and rated CO2 extinguishing systems from G&S contribute greatly to the safety of people and the environment and to protecting investments.

ADVANTAGES OF
SIL 2 CERTIFIED
EXTINGUISHING SYSTEMS

  • Proven CO2 extinguishing systems and equipment
  • Easy integration into concepts for the safety of the entire system

  • Internationally harmonized analysis of protective equipment

  • Defined “Life Cycle Management”

  • Complete review of the protective device from the sensor via the transmitter and control up to the actuator

APPLICATIONS FOR
SIL 2 CERTIFIED
EXTINGUISHING SYSTEMS

  • Power Plants

  • Petrochemicals

  • Pipelines

  • Process Plants

Rosenbauer CO2 Extinguishing Systems up to Safety Integrity Level 2

Rosenbauer and its CO2 extinguishing systems offer a certified fire protection system that can easily be used in safety-related systems. The concepts and methods of IEC 61508 apply to all of the important steps and components.

In a first step, the requirements are agreed with the customer. The SIL standard defines the parameters here that the customer must provide for the planning and implementation of activities. These figures provide the classification results from SIL 1 to SIL 4. The engineers at G&S Group then develop and define the appropriate fire protection system from fire detection to triggering extinguishing.

The monitoring is undertaken by verifying the individual design and manufacturing steps. The validation has already been provided by TÜV Rheinland. A complicated, individual, external check on each plant is therefore no longer necessary up to SIL 2. In the Rosenbauer plant in Mogendorf, the system is then built and tested before it is installed for the customer by an Rosenbauer assembly team. Regular maintenance by Rosenbauer service technicians is an integral part of the SIL certification and guarantees the safe operation of the plant for life.

MINIMIZING THE RISK
IS DEDICATED MAINLY BY:

  • Definition and assessment of risk by detailed probabilities of the failure of the sensor to the actuator

  • Definition and implementation of measures to reduce the residual risk

  • Use of rated or certified devices

  • Regular testing of correct operational function

Die Kriterien für die unterschiedlichen SIL-Einstufungen

Risk-reducing measures are divided into four levels from SIL 1 (low risk) to SIL 4 (very high risk). The demands on the measures to reduce risk and the components used rises with the risk.

Functional Safety by SIL 2

The goal is to ensure the functional safety as part of the overall safety of the systems and machinery. This depends on the correct functioning of the risk reduction systems.

Proper safety functions must be performed under defined error conditions and with a defined high probability.

With the requirements of the international IEC 61508 standard, it now calls for a quantitative verification of the residual risk for the entire protective device consisting of sensors, controllers and actuators.

FULL LINE DISTRIBUTOR
IN FIRE PROTECTION

Rosenbauer Fire Protection
provides the full line of
products and services
in the preventative
fire protection business.

BEST ADVICE AND
PROVEN DESIGN

Nearly three decades of
experience in planning and
designing fire protection
systems for all cases of
safety requirements.

IN-HOUSE ENGINEERING
AND ASSEMBLING

Supervision and construc-
tion according to various
safety standards by our
own engineers and
high qualified personnel.

RELIABLE SERVICE
AND MAINTENANCE

Continuous maintenance
by trustworthy partners
is the key to an
unimpeachable preventative
fire protection system.

Any questions to your own fire protection project?
Our experts are happy to help you further.

ALMOST THREE DECADES IN IMPLEMENTING FIRE PROTECTION SYSTEMS
AND STILL ON FIRE FOR IT.

WATER-BASED SYSTEMS

SPRINKLER SYSTEMS

This common type of water-based fire extinguishing system is reliable and easy to implement.

SPRAY DELUGE SYSTEMS

Deluge systems are the first choice in areas with a risk of rapidly spreading fires.

WATER SPRAY SYSTEMS

Water mist already exerts its effect on flames and smoke – for safety of people and assets.

GAS-BASED SYSTEMS

CO2 FIRE SYSTEMS

The gas-based extinguishing system with widest acceptance worldwide.

SAFETY INTEGRITY LEVEL 2

Systems certified for risk classes up to SIL 2 – an integral component in security concepts.

NOVEC 1230 SYSTEMS

Reliably and automatic protection for data processing and electronic control systems.

INNOVATIONS

ROSENBAUER SPRINKLER-APP

Get our Sprinkler-App! A useful tool to evaluate dimensions of sprinkler systems.

MASTERCONTROL

Subtantial reduction of operating costs with automated sprinkler system inspections.

FIRE DAMPER RETROFIT

Renovate the fire dampers by installing a low-pressure extinguisher system.